Best Circular Saw for the Money

Types of circular saw

SidewinderHitachi C7BMR

Sidewinder circular saws are the most common types of circular saw. The motor on a sidewinder sits either on the left or right of the blade and connects directly to the blade arbour. The most common placement of the motor is on the left hand side of the saw, although there are some right handed placements available such as the Bosch CS5.

Worm Drive

Worm drive saws tend to be slightly heavier than sidewinders due to the gearing mechanism. A worm dewalt_worm_drivedrive saw has the motor is oriented parallel to the blade in and uses a worm gear to power the blade, this has the advantage of increased torque but the disadvantage of a heavier saw. Worm drives are also more expensive than sidewinders.



Hypoid saws are similar in design to worm drives. The difference between hypoid saws and worm drive saws is the gearing system and the fact that worm drives have an oil reservoir that can be replenished and hypoid saws have a sealed gearing system. The Gearing on a worm drive is a worm gear and on the hypoid it is a conical gear. Similar to worm drive saws, Hypoid’s tend to be heavier than sidewinders but offer more torque. Hypoid saws are in a similar price bracket to worm drives.

Blade Size:

Circular saws are most often categorized by the diameter of the blade. The most common size of blade is 7-1/4 inch. A wide variety of blades variations are available in this size for cutting a variety of materials including wood, metal and stone.

The power of circular saws is most often expressed in amperage. 15-amp saws are the standard and can power the blade to between 5,000 and 6,500 RPM on a sidewinder saw.

Corded or Cordless

Cordless circular saws tend to be more expensive than corded saws and are great if you are cutting where there is no power available or when you are moving about frequently. Cordless saws are less powerful than corded saws and tend to have smaller blades. Although, due to improved battery and motor design cordless circular saws are continually getting faster and more powerful and many professionals are now using them instead of corded tools.


Most Circular saws come with a carbide-tipped wood cutting blade. This might be OK if you are ripping some rough timber or boards, but there are many other types of blades available for different types of material. You can buy blades for cutting wood, tiles, concrete and even plastic. If you are planning to do a lot of work requiring clean cuts, you should consider buying a blade with more teeth.

Best Circular Saws for the Money (Detailed Reviews)

Bosch CS5 120V Circular Saw

Bosch is known for delivering power tools that are low in price but high in power, and the CS5 120V 7-1/4-Inch Circular Saw is no exception. Going against the regular right-Bosch CS5sided edge, the Bosch CS5 has a hard-to-find left edge for improved line of sight, resulting in better accuracy and safer cuts.

It comes with a 120V motor for superior performance and has a snag-free lower guard as an additional safety feature. With its radical design, powerful cutting performance, lightweight portability and added features, this left-sided circular saw is an ideal candidate for people who are looking for the best in price to performance and features ratio.

Click here to see what others are saying about the CS5

When you buy any tools from Bosch you know that they will be well made and robust in their design. The Bosch CS5 is certainly no exception to this, and you will notice just how sturdy the tool is when you handle it for the first time. It is also comfortable to hold and you will be able to control it with ease whenever you are cutting with it.

A closer look at the Bosch CS5

Left-sided design

Most circular saws on the market are right-handed as standard, like the Makita 5007F and Hitachi C7SB2. But Bosch decided to make the CS5 circular saw with a left-oriented blade setup. This means that the blade is mounted on the left side to allow an improved line of sight for right-handed individuals.

By holding the circular saw with the right hand, the eyes are naturally set on its left side, for a clearer, unobstructed sight to the line of cut. While the left-orientation will still require you to keep an eye on where you are cutting, you will find yourself spending less time lining it up and second guessing your cuts.

Bosch CS5 review

120V motor and 7.25 inch blade

Bosch CS5 120V Left-Sided 7.25-Inch circular saw has a 15-amp motor which delivers a maximum no load speed of 6,200 rotations per minute. This can go toe to toe with different work pieces, from hard 2 by 4s to large plywood pieces and dense particle boards to structural panels with ease.

It also packs enough power for bevel cutting and plunge cutting as well as masonry and metal cutting. While the standard 7.25 inch blade of the circular saw is not all that hot, Bosch has been nice enough to include a 24-toothed carbide-tipped blade.

While it’s ideal for cutting sheet goods and other applications, users may want to replace the standard blade with a 40-toothed blade for cutting down on splintering and produce a smooth edge every time.

Bosch CS5 circular sawNo-snag blade guard

The Bosch CS5 circular saw is great down to the blade guard. Unlike old circular saws that have blade guards binding up constantly, the CS5 circular saw offers a no-snag operation, thanks to its advanced blade guard design that works smoothly on any kind of cut.

Safety first

Other than having a fresh, left-sided design, the CS5 is a straightforward machine and not full of bells and whistles or any unnecessary features. It does not sacrifice safety for any additional features, even when cutting through thin sheet work pieces.

Its featured adjustments make use of levers rather than wing nuts, making them more secure and easier to work on. This will also save you from having to constantly check on the tightness of the wing nut in fears of things loosening up inside and causing accidents.

The Bosch CS5 saw allows for easy transportation as it weighs just a little over 10 pounds. It comes complete with a 9 foot power cord, and blade wrench, and is covered by the company’s 1 year limited on parts and service.

Final thoughts on the Bosch CS5

If you are looking for a low cost circular saw that gives you power and reliability, then the CS5 from Bosch is certainly a good option. There is nothing fancy about this saw, it is simple in its design and does not have too many additional features about it.

But is cuts really well, it’s powered by a good motor and the tool is very durable so you will get a lot of use from it too. Overall the Bosch CS5 is a great budget circular saw that will cut applications accurately and neatly.

Makita 5007F 15Amp Circular Saw

This is one of the entry level Makita 5007Fsaws from Makita, but it certainly does not lack in any quality, as it is a very robust and powerful saw that will cut through a number of applications very easily.

If you work in the construction industry, or you just like to do some DIY work at home, then you will know how important a good quality circular saw can be for certain jobs. They have the ability of cutting a lot of applications very quickly, and the portability of them will make you more efficient as you do not have to carry the application to a table saw, you can take the saw to the application.

Click here to see what others are saying about the 5007F

For the tougher jobs among these applications, a circular power saw that has an AC power supply is more ideal to use as it will outlast, outclass, and outperform a recharged battery. With the arrival of the 5007F 7-1/4-Inch circular saw, Makita aims to assist users every step of the way, no matter the difficulty.

A closer look at the Makita 5007F

15amp motor for 5,800 rpm

The Blue 5007F is centered around a 15 Amp motor that drives the saw blade unladen by up to 5,800 rotations per minute for outstanding cutting power with its 7 and 1/4th inch (184 millimeter), right-oriented carbide-tipped blade with a 5/8 inch (16 millimeter) arbor size. The motor is cosseted with a built-in centrifugal fan and baffle, allowing the motor to stay cool for maximum performance.

Makita 5007F  Makita-5007F-3a

AC/DC for flexible power

The Makita 5007F Circular Saw is quite more flexible compared to most power saws as it comes equipped with an AC/DC switch, so users can use both of the power inputs. It’s included standard 8ft power cord however, is made for 110 and 120 volts.

Electric brake and aluminum base

There’s also an integrated electric brake system to provide intervals when needed. This also works as one of the machine’s safety systems. The base of the Makita 5007F 7-1/4-Inch Circular Saw is made from heavy-gauge aluminum, letting it withstand frequent job site abuse and always provide a straight cutting line.

Makita 5007F circular saw Makita-5007F-4a

Versatile cutting depths

Despite its sheer power and durability, Makita wrapped the 5007F Circular Saw in a compact size of 17.5 by 13 by 10.1 inches. To stay light for the busy tradesman, it weighs approximately 10.6 lbs, or roughly 4.8 kg ‚Äď making it one of the lightest among its class.

A 45 degree bevel capacity gives the circular saw a maximum cutting depth of 1.75 inch (45 millimeter), while a 2.375 inch (60 millimeter) capacity is possible at 90 degrees. This will give you the ability to cut through some pretty big applications such as ply board and MDF sheets.

Additional features

Built for the pros, safe for beginners, the Makita 5007F has other safety features aside from its electric brake system. It has a flat motor-housing setup for improved stability as you change the saw blades. It also features a built-in dust blower that clears the cutting line for accurate cuts every time.

Makita-5007F-5a Makita-5007F-6a

To assist you further with all that cutting, the 5007 is integrated with an ultra-bright LED light that keeps the cutting line illuminated. The switch for this option is separated from the saw’s actual trigger to make sure that the blade is on the right track before making the cut. Top it all off with large, clear markings on the bevel and depth scales, you simply can’t go wrong with this circular saw.

Along with the 5007F circular saw, the kit comes with a carbide-tipped, MForce saw blade, blade spanner/wrench, rip fence, and a plastic Makita carrying case. For longer tool life, the Makita 5007F 15Amp Circular Saw is made with an all ball-bearing construction and is covered by the company’s 1 year limited warranty on parts and service.

Final thoughts on the Makita 5007F

This is a small and portable circular saw that is not full of features and addons like you will find with more expensive models. But if you just need a saw that is going to cut well for you and is reliable, then this is a very good choice. The Makita 5007F is a very affordable circular saw, and you are getting a lot of value for you money as it certainly does its job very well.

Makita BSS610 Lithium-Ion Cordless Circular Saw

The Makita BSS610 circular saw kit gives you a very good quality saw, along with some very useful accessories too. This saw is ideal for both the home DIY user and the Makita BSS610 professional that needs a cordless saw capable of handling a heavy workload.

The design of the Makita BSS610 is focused around user comfort and ease of handling. The saw only weighs 7.1 pounds, so it is easy to use for longer periods without encountering any user fatigue. The cordless design makes it very easy to maneuver as you will not be restricted by any leads.

Click Here to see what others are saying about the BSS610

A powerful saw like the BSS610 is going to need a strong battery to ensure it works effectively for long periods. This is why this kit comes with two 18 volt LXT lithium-ion batteries. Not only do these batteries provide more power and a longer charge, but they can be recharged from flat to full in just 30 minutes.

The Makita BSS610 is very versatile and can be used for cutting a wide range of applications. It can be used for jobs such as roofing, woodworking, remodeling and carpentry to name just a few. For a contractor this is ideal as it will save from having to use multiple tools for the different jobs.

Key features of the Makita BSS610

High torque motor

The high torque motor on the Makita BSS610 ensures that it can be used on even the toughest of materials and cut through them cleanly and efficiently. It produces up to 3,700 RPM so that each time it is used it will cut through the materials without ripping them apart for a neater and higher quality finish.

Makita BSS610 review Makita-BSS610-5a

Bevel cutting capacity

You can set the Makita BSS610 to cut bevels at anything up to 50 degrees. Having this ability will provide you with more efficiency as well as accuracy for the jobs you are working on. It is a very quick and easy process to change the bevel angles whenever you need to.

LXT lithium-ion batteries

The two 18 volt LXT lithium-ion batteries used to power this circular saw use advanced technology to give them up to 430% more total operational lifetime, as well as 2.5 times more cycles than a traditional battery. They will be able to get you through a significant amount of work before they start to lose their power and require a charge.

Makita BSS610 circular saw Makita-BSS610-7a

As well as the two LXT batteries, you also get the Energy Star rated rapid optimum charger that will fully charge the batteries in just 30 minutes. This will reduce any downtime to practically nil, so you will be able to get through your workload more efficiently.

Additional features

The Makita BSS610 comes equipped with a built-in LED light so you can illuminate the area you are working on to ensure you can see exactly what you are doing. The saw also has a built in dust blower, so that the cutting line does not become obscured and you have a clear sight of where you need to cut.


So is the Makita BSS610 the right saw for you?

Going cordless just gives you that much more ease-of-movement, but you need the power in the saw to make it worth-while. The BSS610 certainly provides you with that power and ability, so you can get the best results with it. The robust design and reliable motor makes the Makita BSS610 a serious option for the professional or DIY user.

Makita 5007MG Magnesium Series Circular Saw

Made from magnesium components, the Makita 5007MG 7-1/4-Inch Circular Saw is lighter and stronger than other traditional saws, which results in improved performanceMakita 5007MG  and increased ergonomics. This part of Makita’s Magnesium Series offers plenty of power with the brand’s engineering along with a precision balanced design that delivers accurate cuts.

The highly durable 5007MG is powered by a robust 15-amp Makita industrial motor and balances power, weight, easy maintenance, and user friendly features, making it one the most refined power saws out on the market.

One thing that you will notice that is consistent throughout all of Makita’s tools is the well thought out and innovative designs they use. The Makita 5007MG is certainly no exception to this rule, and as soon as you hold it you will see just how well balanced and comfortable it is to use.

Overview of the Magnesium series

Click here to see what others are saying about the 5007MG

A closer look at the Makita 5007MG

Flexible power

Engineered with a 15-amp industrial motor that generates 5,800 rotations per minute, the Makita 5007MG Circular Saw provides true power for professional job demands but compact enough to serve as a handy tool for home and personal needs.

It has a sizable cutting capacity of 2 and a half inch at 90 degrees to handle different framing and cutting applications, with a max bevel capacity of 56 degrees and positive stops at 45 degrees and 22.5 degrees for easy changes.

Makita 5007MG review Makita-5007MG-3a Makita-5007MG-4a

Ultra-coated saw blade

Makita’s 5007MG Circular Saw comes with an exclusive 7 and 1/4th inch ultra-coated framing saw blade with an advanced M-shaped tooth design. This features a double pointed tip with 10-degree bevel faces for optimum cutting performance, resulting in cleaner, faster, more-efficient cuts.

Protected with carbide tips, the saw blade is designed to work even in the roughest conditions, like plowing through a nail-riddled wood. Thanks to the exclusive heat-vent design that dissipate heat and ultra-coating process by Makita, the blade can also resist pitch and heat build-up for smoother and faster cuts. Top it all off with a blade wrench attachment for quick and easy blade changing.

Ergonomics and user-friendly features

Weighing only 10.1 pounds, the magnesium components that make up the Makita 5007MG has paved the way for lighter circular saws and other power tools. Its advanced design offers greater clearance between the saw blade and the rear handle to promote a better grip for gloved hands or users with bigger hands.

Makita-5007MG-5a Makita-5007MG-6a

It also has a wider space between the housing and saw blade for a clearer blade view and measurement scale check. Twin LED lights provide illumination for safer and more accurate cuts, while a ducting system blows away the dust from your cutting line.

The brand paid close attention to ergonomics and user-friendliness with its clearly visible bevel and depth markings and comfortable hand grips for complete control while reducing operator stress. For more efficient work, the levers are enclosed in large rubber material that allows fast, one-handed adjustments.

Made for different applications

The Makita 5007MG 7-1/4-Inch Circular Saw is another fine example of Makita’s dedication to the best-in-class engineering and innovative technology. While looking decently compact at 20.9 by 17.9 by 13.9 inches, this circular saw is actually engineered to suit different applications such as framing walls, roofs, floors using different dimensional lumbers or dense engineered wood including I-Joists, PSL, LVL, and microlams.

It is also suitable for ripping panels like OSB, particle boards, plywood, and dense structural panels. But that’s not all, as the saw also extends to other applications ranging from bevel and plunge cutting to metal and masonry cutting.

The 5007MG 7-1/4-Inch Circular Saw comes complete with a rip fence, hex blade wrench, and tool case. It is covered by Makita’s limited 1 year warranty on parts and service.

Final thoughts on the Makita 5007MG

This saw is light and very easy to handle. It packs a lot of power and you will find it will cut through tougher applications with ease. Ideal for use at home or out on site, the Makita 5007MG is a really durable and reliable circular saw that provides quality and value for money.

Milwaukee 6390-21 Tilt-Lok Circular Saw

Although Milwaukee power tools often get overlooked by brands such as Makita and Dewalt, they do have some excellent tools, and often at very reasonable prices too. One Milwaukee 6390-21tool we are going to look at closely today is the Milwaukee 6390-21 tilt-lok circular saw.

The Milwaukee 6390-21 has a 7- 1/4 inch blade and a powerful motor, and combined these give the saw its ability to work on heavy duty applications and cut through them with great efficiency. It is a very comfortable saw to use, and is ideal for those that need to use it on site as it can hold up to the heavier workloads.

The soft handle grip will help to reduce any fatigue that the saw could create after a lot of usage. With the fast blade rotations you will find that the saw glides fairly easily through most applications, so you will not have to put too much pressure on the saw.

Key features of the Milwaukee 6390-21

Motor type

The Milwaukee 6390-21 uses a 15 amp, 3- ¬ľ HP motor that is able to produce up to 5,800 RPM. The blade starts off slowly so that the cut is more clean and accurate. It also maintains a very even speed and you go through the materials you are cutting.


Cutting ability

While most circular saws have a fixed handle position, that can be awkward for some types of cutting, the Milwaukee 6390-21 has an innovative 8 position Tilt-Lok handle. This enables you to move the handle to any one of the 8 positions and get the best angle for the job you are working on.

Milwaukee-6390-21-1aThe Milwaukee 6390-21 can be used to cut a wide range of applications. When you want to change the blade out and put another one in you can do so very quickly and easily by using the one-touch spindle lock button, that will allow the blade to be released and changed very efficiently.

Click here to see what others are saying about the 6390-21

You can also cut bevel cuts up to 50 degrees when using the 6390-21. To change the cutting angle is a simply process that can be done in a second, and will give you the accurate cutting ability at any bevel angle up to 50 degrees.

Ease of use

No matter what job you are using the Milwaukee 6390-21 on, it seems to be able to take them all in its stride. It is a very easy saw to operate, from changing the settings on the saw to actually cutting with it, this saw just feels comfortable in all situations.

The incredible power that it has does help to make cutting that much easier, but the whole design and set-up of the saw is done to make things as easy and efficient as possible Milwaukee 6390-21 reviewfor the user. It is one of the lightest circular saws in the class too, so again this will help if you have a lot of work to do with the saw.

Final thoughts on the Milwaukee 6390-21

The 6390-21 is certainly very worthy of the high praise it receives from consumer magazines and actual users of the saw as well. It is a little power-house and certainly packs a punch that is capable of cutting through a wide range of applications.

From being one of the lightest and most powerful saws in its class, and also one of the easiest to use, the Milwaukee 6390-21 is a really good option for anyone that needs a circular saw they can rely on and get the job done efficiently. Plus at the current selling price, you are getting a lot of value for your money.

Dewalt DWE575 Circular Saw

The new updated Dewalt DWE575 is an extremely light, so easy to use for longer durations. This makes it an ideal saw to be used by professionals out on site. Do not mistakeDewalt DWE575 the light weight of this circular saw for a flimsy design. It has been really well designed and constructed and is very durable. It will hold up to really heavy workloads and packs a lot of power in its small frame too.

The Dewalt DWE575 is also very comfortable to handle. As it is not that large in size, you will not have to struggle to get it through your applications as it cuts. It glides through them fairly effortlessly, and the power of the motor and speed of the blade make this that much easier for you. The aluminum base on the saw makes the cutting motion really smooth, and this will keep it accurate also.

Click here to see what others are saying about the DWE575

This is an extremely versatile saw, and is ideal for cutting plywood sheets, MDF sheets, framing walls and exterior finishing to name just a few. It is an ideal tool to have for many different types of contractors, and its versatility and ease of use are something that a lot of different tradesmen can benefit from.

Overview of the DWE575

Key features of the Dewalt DWE575

15 AMP motor

The 15 AMP motor on the Dewalt DWE575 provides the power it needs to glide through all different kinds of applications. It delivers up to 5,200 RPM, which for a 7.2 inch saw is a lot of power and speed to have. The compact size of the saw itself make it that much easier to handle, and when you pair this with the power it produces, then you have the makings of a really good circular saw.

Angled cutting ability

You have the ability to cut up to a 57 degree bevel capacity with the Dewalt DWE575 circular saw. There are detents set at 22.5 degrees and 45 degrees so you can keep the cut accurate throughout. It will also allow you to cut down to a depth of 2- 9/16 inches too, so you get quite a bit of play with the applications you are cutting.

Dewalt DWE575 review Dewalt DWE575 circular saw

Built in dust blower

To ensure you have a clear view of your cutting line on all of the applications you use the saw on, it has a built in dust blower that will clean the cutting line for you. This is a very useful feature that will ensure your quality of work remains high.

Product size

As previously mentioned, the Dewalt DWE575 is a very compact circular saw, and this promotes ease of use and accurate cutting ability too. The actual dimensions of the saw are as follows:

  • Length = 16.2 inches
  • Width = 8.9 inches
  • Height = 10.1 inches

Dewalt-DWE575-4aAdditional features

The lower guard uses an anti-snag ball bearing that helps to provide extra control when going through the cutting motion. It also helps to protect the saw and prolong the life of the saw too. The Dewalt DWE575 has a ToughCord system cord system. This provides added resistance to pullouts, so you will not have your work interrupted by a sudden loss of power.

Final thoughts on the Dewalt DWE575

The DWE575 is very light and easy to use. It also packs a lot of power too, so you get a lot of cutting ability. The handle on the saw is soft, so it is very comfortable to use, even for extended periods. Overall, the Dewalt DWE575 is an excellent circular saw and is ideal for use by both professionals and home DIY enthusiasts too.

Makita 5007MGA Magnesium Series Circular Saw

The powerful and easy-to-use Makita 5007MGA circular saw is an excellent addition to their Makita range. This model offers precision cutting ability, as well as some reallyMakita 5007MGA  useful features to help enhance the overall user experience with the tool. It has been designed for the professional, and features such as the electric brake will help the overall efficiency of the tool.

Components made from magnesium are lighter yet stronger than traditional materials, which results in power tools that are powerful, lightweight, and with better ergonomics. This is all thanks to Makita’s dedicated research and precision engineering that gave birth to tools like the Makita 5007MGA circular saw.

Click here to see what others are saying about the 5007MGA

This power saw from the company’s Magnesium-Series comes with a 15amp-strong industrial motor that works together with its 7-1/4 inch M-toothed blade for accurate, clean cuts. As one of the most refined circular saw available in the market, the 5007MGA smoothly balances power, weight, user-friendliness, and durability thanks to its main features and useful options.

A closer look at the Makita 5007MGA circular saw

15amp industrial motor

A powerful 15-amp industrial motor powers the 5007MGA, letting it generate speeds up to 5,800 rotations per minute. Working together with the magnesium components, it’s not just a reliable workhorse but a lighter one at that too.

Makita 5007MGA review Makita-5007MGA-3a

This combination makes it ideal for framing walls, roofs, and floors with a range of dense engineered wood and dimensional lumber, including PSL, LVL, I-Joists, microlams, and headers, or for ripping panels like particle board, OSB, plywood, and dense panels. It is also versatile enough to handle bevel, plunge, and metal cutting, as well as masonry tasks.

7-1/4 inch framing blade

The 7-1/4 inch framing blade is made with a Premium Ultra-Coated, Carbide-Tipped Framing Blade with an advanced ‚ÄúM-toothed‚ÄĚ design. The blade features a double pointed tip and a pair of 10-degree bevel faces for optimal cutting performance.

This allows cleaner, faster, and longer lasting cuts every time. The specially made carbide-tipped blade is made to hold up against severe conditions like ploughing through nail-ridden lumber. The premium ultra-coated blade decreases pitch and heat accumulation for smoother and faster cuts.

This works hand in hand with the strategically-placed heat vents for improved heat dissipation and better overall performance.

Lightweight and ergonomic

Magnesium components are a blessing to power tools like these. The 5007MGA circular saw is only one of Makita’s testaments to this fact, as the company successfully engineered a saw that has considerably lesser weight at just a little over 10 lbs. This makes it a well-balanced yet tough on the job site.

Makita-5007MGA-4a Makita-5007MGA-5a Makita-5007MGA-6a

The circular saw measures 15.2 by 12.2 by 11.3 inches (Length x Width x Height) and has larger clearance between the blade case and rear handle to accommodate better grip for people with bigger hands or those with gloves while working. A wider space is noticeable between the housing and the blade that provides a better view of the measurement scale and blade.

There’s also a pair of LED lights that provides reliable elimination on light-challenged job sites. The depth and bevel markings are clearly visible and the hand grips come with a more ergonomic design for total control and lesser fatigue while working. For more efficient work, the Makita 5007MGA features large rubberized levers that allow fast adjustments with one hand.

Additional features

The Makita 5007MGA Circular Saw comes with a blade wrench attached to the unit for convenient blade replacements. A ducting mechanism is also included for blowing away dust from your line of cut. The circular saw comes with a 1-year limited warranty on parts and labor.

Final thoughts on the Makita 5007MGA

This is a powerful saw from Makita, and it is ideal for the professional that needs reliability and quality from their power tools. It is easy to use, and also very effective in its cutting ability. You will be able to do a wide range of cuts with the saw, and on some tougher materials too. The Makita 5007MGA circular saw is a really good option, and at its selling price you are getting good value for your money too.

Hitachi C7SB2 15Amp Circular Saw

Circular saws are one of the most used saw machines for consumer and commercial applications. While Milwaukee and DeWalt are some of the dominating names in the Hitachi C7SB2power saws industry, newer challengers to the red and yellow brands have emerged, including offerings from engineering and electronics giant Hitachi, and their Hitachi C7SB2 circular saw.

It touts an award winning recognition from the 2005 Taunton Press Tool award and is mentioned on many of the advertisement channels. But the question is, just how good really is this mean green machine? We are going to take a close look at the Hitachi C7SB2 to see whether this circular saw provides the quality you are looking for.

Click here to see what others are saying about the C7SB2

In its usual catchy in green, the Hitachi C7SB2 15 Amp Heavy Duty circular saw boasts a powerful motor, wide bevel range, adjustable stops, cutting-depth adjustment, and more. The C7SB2 is made to work on professional jobs with ease, so if you work in construction then this saw could be a good option for you to take out on site with you.

Specifications for the Hitachi C7SB2

15 amp-strong motor

Hitachi has long been known for providing power tools that deliver. The C7SB2 circular saw is equipped with a single-phase 120-volt, 15amp-strong motor that generates a maximum no-load speed of 5,800 rotations per minute and an output of over 2,100 watts.

This powerful motor gives it that award-winning performance for ripping through plywood, 2 by 4s, OSB, and other common framing materials with ease, making it ideal for personal and commercial purposes.

Hitachi C7SB2 review7 1/4th inch carbide-tipped blade

The 24-tooth, 7-1/4th inch carbide-tipped blade with 5/8th of an inch arbor can make tough cuts look very easy. It offers a 2 and 3/8th inch cutting depth at 90 degrees and 1 and 28/32 inch cutting depth, along with a quick depth lever to lock on the specific depth of cut for the job.

Wide bevel capacity

Aside from making accurate 45 degree and 90 degree cuts, the Hitachi C7SB2 15 Amp Heavy Duty Circular Saw also support clean bevels from zero to 55 degrees in most common framing materials. It features an adjustable bevel lever for finding bevel stops at zero, 45 and 55 degrees. This helps keep the carbide-tipped blade accurate and true as it locks it in place at your preferred angle.

Safety features

Like other circular saws in the market, the C7SB2 has a blade guard for protecting your hands as you cut through simple straight lines or make those tricky angled cuts. As anHitachi-C7SB2-2 added layer of safety, it also has a spindle lock for keeping the blade tightly in place and making blade replacements quick and simple.

Ease of use

The Hitachi C7SB2 Circular Saw is designed to make cutting tasks as easy as possible. For starters, it has a 1-piece, die-cast alloy base that comes with clear scales in front and at the side for making precise measurements. There’s also the anti-slip Elastomer grip handle that gives total control over the circular saw.

This works to lessen strain and stress on the hands for prolonged jobs. Unlike other saws that focus too much on power, this model from Hitachi has a very accessible carbon brush that allows easy brush replacement when needed to promote longer tool life.

What’s more, the Hitachi C7SB2 weighs measures 17 by 13.5 inches and weighing just a little over 10 pounds, it can be very easy to carry around and transport. In case of defects or any problems with the circular saw arise, it is backed by the company’s 5 year limited warranty.

Final thoughts on the Hitachi C7SB2

This saw is light and fairly easy to handle. It is ideal for taking out on site and is easy to move around and will make your work that much more efficient. It is an entry level circular saw, but it does give you quite a bit of power to work with and you will find that it cuts very well through a wide range of applications. Overall, the Hitachi C7SB2 is a very good bye for the low price it sells at.

Leave a Comment

This site uses Akismet to reduce spam. Learn how your comment data is processed.